• 4-Bolt Center Flange Heco Gearbox-0 Add to cart Quick View

    4-Bolt Center Flange Heco Gearbox

    $1,385.00

    4-Bolt Center Flange Heco Gearbox – Compatible with 16M Sun Gear Kit

  • Brand Hydraulic Flow Control Valve - 1/2"-0 Add to cart Quick View

    Brand Hydraulic Flow Control Valve – 1/2″

    $179.00

    1/2″ Ports 18 GPM. The Brand, full range pressure compensating variable flow control is designed so that the orifice area varies as the lever is rotated. Fluid travels past the variable orifice, through the compensator spool and then out the controlled flow port. Therefore the flow out of the CF port is proportional to the orifice area which can vary from closed to open. The sum of the controlled flow and the excess flow equals the inlet flow and as the controlled flow increases the excess flow decreases. Both outlet flows are pressure compensated with a spool that maintains a constant flow by adjusting for pressure. Hunting between the compensated pump and our valve is dampened with a dashpot on the compensator spool. Thus, the outlet flow is smooth and constant regardless of the pressure on the CF and EX port. External seals on the rotary spool prevent contamination from getting between the spool and the casting, thus preventing the spool from locking in one position. All FC’s are built with stainless steel (416) rotary spools to help prevent the rotary spools from locking up when they are in a corrosive environment. We also offer the FC with outlet ports coming from the top of the casting.

  • Brand Hydraulic Flow Control Valve - 3/4"-0 Add to cart Quick View

    Brand Hydraulic Flow Control Valve – 3/4″

    $179.00

    3/4″ Ports 30 GPM. The Brand, full range pressure compensating variable flow control is designed so that the orifice area varies as the lever is rotated. Fluid travels past the variable orifice, through the compensator spool and then out the controlled flow port. Therefore the flow out of the CF port is proportional to the orifice area which can vary from closed to open. The sum of the controlled flow and the excess flow equals the inlet flow and as the controlled flow increases the excess flow decreases. Both outlet flows are pressure compensated with a spool that maintains a constant flow by adjusting for pressure. Hunting between the compensated pump and our valve is dampened with a dashpot on the compensator spool. Thus, the outlet flow is smooth and constant regardless of the pressure on the CF and EX port. External seals on the rotary spool prevent contamination from getting between the spool and the casting, thus preventing the spool from locking in one position. All FC’s are built with stainless steel (416) rotary spools to help prevent the rotary spools from locking up when they are in a corrosive environment. We also offer the FC with outlet ports coming from the top of the casting.

  • Placeholder Add to cart Quick View

    Char-Lynn S-Series Seal Kit – 103-XXXX-006

    $40.00

    Char-Lynn S-Series Motor Seal Kit – 103-XXXX-006

  • Prince Hydraulic Flow Control Valve - 1/2"-0 Add to cart Quick View

    Prince Hydraulic Flow Control Valve – 1/2″

    $122.95

    The PRINCE valve is a pressure compensated adjustable flow control valve. By rotating the handle, the flow out the “CF”, or controlled flow port, can be varied from approximately 0 to the maximum controlled flow shown in the chart below. Any remaining flow is bypassed to the “EF” or excess flow port. This flow can be used to power another circuit or can be returned to tank. Once the controlled flow is set it will remain nearly constant with variations in pressure on either the controlled or excess flow ports.
    Controlled Flow Range………………….0-16 GPM
    Maximum Operating Pressure …….. 3000 psi
    Flow Rating ……………………………….30 GPM
    Maximum Operating Temp…………….180°F
    Weight ……………………………… Approx 8 Ibs

Shopping Cart

Filter by categories